16
Chapter 2 Conguring from the monitor screen
4. Congure the items.
For setting details, contact your system administrator.
4
5
Item Detail Setting range
Camera Name Enter the camera name. When selecting ‘Execute’
for ‘Obtain Camera Name,’ the camera name is
automatically obtained from the network camera.
• Panasonic network camera: Camera Name
• AXIS network camera: Camera Name
• Network camera compatible with the “ONVIF”
protocol: Camera model number, manufacturer
name, etc.
Alphanumeric characters
(up to 24 characters)
IP Address Enter the network camera IP address. 0.0.0.0 to 255.255.255.255
HTTP Port Enter the network camera HTTP port number. 1 to 65535
Protocol Select the protocol for controlling the camera. Panasonic / AXIS / ONVIF
Stream
*1
Set the number of the stream for delivering
camera images. Select a stream supported by the
connected network camera.
CH1 to CH4
Channel
*1
Select the channel of the analog encoder. Set to "1"
if the network camera does not support the channel
function.
CH1 to CH4
RS485 PTZ Control
*1
Controls the brightness, automatic focus adjustment,
pan, tilt and zoom for devices that are connected to
the network camera via a RS485 cable.
On / Off
Username
*2
Enter the username to use when accessing network
cameras.
Alphanumeric characters and
symbols
(up to 32 characters)
Password
*2
Enter the password to use when accessing network
cameras.
Alphanumeric characters and
symbols
(up to 32 characters)
*1 Supported only when compatible with the Panasonic protocol.
*2 Enter the username with administrator rights and the password.