Eizo DuraVision FDF4627W-IP

36
Chapter 2 Conguring from the monitor screen
2-7. Setting User Information
Register, change or delete information (username, user level and password) on users that access this
product, and congure Auto Login settings.
Attention
• User information can be registered for up to 10 users. User information for a new user cannot be registered when
there are already 10 users registered.
• Duplicate usernames cannot be registered.
• At least one user with a user level of “ADMIN” must be registered.
• You can use alphanumeric characters for the username, however, the following character is not allowed: “ : “.
Note
• There are three user levels: “ LIVE”, “CAMERA CONTROL” and “ADMIN”.
The operable range of this product differs by each level.
(√: Operable, -: Inoperable)
Operation
Level
Menu
display
Layout
change over
Page
change over
Visibility
Optimizer
function
on / off
Login
operation
Camera
control
System
settings
LIVE √ √ √ √ √ - -
CAMERA CONTROL √ √ √ √ √ √ -
ADMIN √ √ √ √ √ √ √
• The following user information is set by default:
- Username: “admin”
- Password: “admin”
- User Level: “ADMIN”
• User information settings or Auto Login settings can be returned to default settings according to the following
procedure. Use this feature, for example, when you have forgotten the registered user information.
1. Press
on the remote control to turn off the monitor.
2. Press the buttons on the remote control in the following order (press the next button within ve seconds).
→ → → → → →
When the reset conrmation screen is displayed, select “Execute”.
User information is cleared and the settings are returned to the default settings.