67
Chapter 3 Conguring from a Web Browser
Software Update
You can both upgrade or downgrade the software version.
1. In “System”, select “Maintenance”.
The screen transitions to “Software Update”.
2. Select “Browse”.
A le selection dialog box opens. Select the applicable le.
Attention
• The software will not be updated if a le is not selected, or a le other than an update le has been
selected.
• Perform software updates with the monitor screen displayed.
3. Select “Execute”.
4. The following message appears.
Select “OK”.
5. The update process starts, and the following message appears.
Select “OK”.
6. The software is updated.
Close the web browser, and wait 5 minutes before accessing again.
Note
• You can select update les from the File Selection screen, and can perform upgrading or downgrading of
software.
• When you restart your system, a message indicating the success or failure of the software update will
appear. The message will clear automatically after 60 seconds if “OK” is not selected. However, this
message will not appear if you do the update through your web browser.
To Next Page
Loading...
