Eizo Foris FG2421 - To adjust gamma; To adjust gain

17
Chapter 2 Adjusting Screens
●
To adjust gamma
The gamma value can be adjusted. The brightness of the monitor varies depending on the input signal.
However, the variation rate is not proportional to the input signal. Keeping the balance between the input signal
and the brightness of the monitor is called as “Gamma correction”.
Adjustable Range
Settings Purpose
1.8,2.0,2.2,2.4,2.6 Setthegammavalue.
FPS(High),FPS(Medium),FPS(Low) ThesesettingsareapplicabletothedisplayofFPSgames,andmake
thelow-tonepartsofthescreenbrighter.“FPS(High)”isthebrightest
setting.
RTS ThissettingisapplicabletothedisplayofRTSgames.
Power Theimageswillbesharpenedbyincreasingthehalftonecontrast.
Procedure
1. Choose “Color” from the Setting menu, and press
.
2. Choose “Gamma” from “Color”, and press
.
The “Gamma” menu appears.
3. Use or for adjustment.
4. Press
to exit.
●
To adjust gain
The brightness of each color component - red, green, and blue - is called Gain. You can change the hue of
“white” by adjusting gain.
Adjustable Range
0 to 100
Procedure
1. Choose “Color” from the Setting menu, and press
.
2. Choose “Advanced Settings” from “Color”, and press
.
3. Choose “Gain” from the “Advanced Settings” menu, and press
.
The “Gain” menu appears.
4. Adjust gain with or for each of red, green, and blue.
5. Press
to exit.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of the gain changes with that of color temperature.
• When the gain is changed, the color temperature is changed to “Off”.