E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
© ELAN Home Systems 2009 • All rights reserved. Page 93
S86A
Examples:
• &S86,LUD,13,0<cr> turns Zone 13’s Loudness off.
• &S86,LUD,02?<cr> queries Zone 2’s Loudness.
• &S86,LUD,13,1<cr> turns Zone 13’s Loudness on.
• &S86,LUD,13,2<cr> toggles Zone 13’s Loudness from on to off or off to on.
PG
Description:
• Turns PG off/on/toggle. This will initiate a PG that will route audio present at the S86A’s
Page In audio jack to all zones that have PG enabled.
• Works if the System/Zone is on or off.
Command:
&S86,PG,0,a<cr>
Query any page activity:
&S86,PG?<cr>
Reply:
&S86,PG,a<cr>
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
a:
0 = OFF
1 = ON
2 = Toggle
Examples:
• &S86,PG,0,1<cr> Activates all zones to Page ON.
• &S86,PG,0,2<cr> Toggles all zones Page from on to off or off to on.
To Next Page
Loading...
