Elan s86a - Query Commands; ASD (Audio Signal Detect)

E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
© ELAN Home Systems 2009 • All rights reserved. Page 95
S86A
Video Commands
VID (Video)
Description:
Switches S86A video outputs in Zone zz to a specific Video a input.
Command:
&S86,VID,zz,a<cr>
Query:
&S86,VID,zz?<cr>
Reply:
&S86,VID,zz,a<cr>
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
zz:
Zone: 01-24
a:
Input 0-8, where zero is video mute.
Examples:
• &S86,VID,03,2<cr> S86 Zone 3 selects Input 2.
• &S86,VID,20?<cr> Queries S86 in Zone 20 for selected video input.
• &S86,VID,07,7<cr> S86 in Zone 7 selects Input 7.