EasyManua.ls Logo

elco TRIGON L PLUS - Delivery Scope Standard Version; Accessories

elco TRIGON L PLUS
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Delivery scope
Standard version
Accessories and Cascade
Standard version
Thedeliveryscopeofaboilerconsistsofthefollowingcomponents:
Accessories
Thefollowingaccessoriescanbe
ordered:
- Flue gas pipes
- Airlter
- Cascade hydraulics (see following
pages)
- Boiler frames (see following pages)
- 3-way valve set
- Outdoor sensor, tank sensor
- T10owsensor
- Control for 3 extra heating zones
- Modbus/LON/BACKNET/KNXbus
translator
- Water/gas connection kit
- Gaslter
- Min gas pressure switch
- LPG conversion kit
- Plate heat exchanger kit
- Low loss header kit
Listedaccessorypartshavebeen
constructed or selected especially for
theTRIGONLPLUSboiler,which
means they are very easy to install
(plug and play). You can compose your
ownsystemsolution,byselectingthe
accessorycombinationthattsyour
needs. For details and prices, please
contact ELCO.
Incaseofcascadeconguration,
accessories that require an electrical
connectionshouldbeconnectedwith
Masterboiler(withtheonlyexception
oftankprobeandClipin,thatcanbe
connectedalsotootherboiler).
Cascade
Inprincipleanycombinationis
possible.Theselectioncaninclude
modelswithdi󰀨erentoutputs,ifthis
meets the installation requirements.
Includingboilerswithcommonoutputs
assists with sharing load and run times
of individual appliance.
The capacity of the hydraulic pipes, gas
line and low loss header are adjusted
to the selected overall demand.
When installing a single TRIGON L
PLUS boiler the use of a low loss
header is strongly suggested.
When installing a cascaded TRIGON
L PLUS boilers: the use of a low loss
header adjusted to the set demand
is mandatory; the realization of an
additional bypass is not allowed;
water collector should be realized in
a the dimension of DN65 or DN100
(according to cascade output).
ELCO supplies low loss header
versions, which are suitable for a
maximum demand of 1600kW.
Components Packaging type
Completelyassembledandtestedboiler 1 Incardboardbox
Rollo󰀨rail 2 Inboilerpackaging
Installation manual TRIGON L PLUS 1
IndocumentbaginboilerpackagingERPlabel(onlyTRIGONLPLUS60-70) 1
condense pipe 1

Table of Contents

Related product manuals