elco TRIGON L PLUS - Errors; Error Codes and Fault Finding

93
Errors
Error codes and fault nding
Cascade
Cascademasterboiler
The cascade master display shows all
errorsthatareknownonthebus,so
alsofromallslaveboilersasfromzone
clip-in, solar manager, etc.
Cascade slave boiler
Shows only an error that is active on
theslaveboileritself.
Error on cascade master from a
slaveboiler.
Error on the master itself.
Erroronaslaveboileritself.
Message on display (no indication of BHE0 and BHE1
Fault Code
engine 1
Fault Code
engine 2
(if applicable)
Overheat 101 1
Overheat 101 2
(Reserved) --
(Reserved) --
Flow Check 1 1P1 1
Flow Check 1 1P1 2
Flow Check 3
1P2 1
Flow Check 3 1P2 2
Flow Check 4 1P3 1
Flow Check 4 1P3 2
Flow Check 2 104 1
Flow Check 2 104 2
Flow Check 5 107 1
Flow Check 5 107 2
ALERT
01/01/15 00:00
Fault 110 1
Boiler Slave 1
Send probe damaged
Fault 110 1
Boiler (local)
Send probe damaged
ALERT
01/01/15 00:00
ALERT
Fault 110 1
Boiler Slave (local) 1
Send probe damaged