Appendix B: Transmitter Installation
iConnect Installation Manual
116
6. After you have confirmed registration, the display returns to New Device. Press to register another
device or to exit Registration mode.
Deleting Registered Transmitters
To delete transmitters from the repeater’s register:
1. On the LCD programming keypad, press until 3. TX Delete appears on the display.
2. Press ; the first transmitter in the list appears on the display.
3. Use the arrow navigation keys (5/6) to scroll to the transmitter you want to delete.
4. Press to select the transmitter.
5. Press
again for confirmation; the transmitter is deleted.
6. Select another transmitter to delete or press
to exit.
Installer Utilities
The EL-2635 repeater offers two installer utilities that serve as a valuable aid during installation and maintenance.
TX List
The TX List is a scrollable inventory of all transmitters that are registered to the repeater and their last reported signal
strength.
To view the TX list:
1. Press until 1. TX List appears on the display.
2. Press ; the first transmitter in the list is displayed.
3. Use the arrow navigation keys (/) to scroll through the list.
4. Press to exit the list.
TX Test:
TX Test is a utility that enables you to identify transmitters that are registered to the repeater and to test their signal
strength.
To perform the TX test:
1. Press until 2. TX Test appears on the display.
2. Press .
3. Activate a transmitter; the transmitter number, type and signal strength are displayed.
4. Press to exit TX Test mode.
To Next Page
Loading...