Elma Elmasteam 8 basic - Page 10

Important Safety Instructions
10
BA_Elmasteam_8_Vers.07.2016 © Elma Schmidbauer GmbH
•
The product is utilised in any way for other than that intended
use as referred to in this manual.
•
When unauthorised technical modifications, amendments and
alterations have been made to the product by third parties.
•
The product was not repaired at a service centre authorised by
the manufacturer or was repaired without using original spare
parts.
•
The product was utilised used despite obvious safety faults or
damage being recognisable on the device.
•
External forces
•
The prescribed maintenance works have not been conducted.
WARNING
High temperatures on the nozzle with nozzle tube!
Serious injuries from burns!
• Only touch the said areas with personal protective
equipment (e.g. protective gloves)
• Allow the unit to cool down before touching any
part thereof.
WARNING
Hot vapours/hot liquids
Risk of scalding from open pressure vessel screw cap
• Hot water splashes and evaporates from the filling
opening
• Turn off the device immediately using the mains
supply switch, unplug the mains supply cable from
the power supply or set the programme selection
to steam outlet (Chapter 6.4.1)
• Let the appliance cool down
• Only close the pressure tank screw cap once the
unit has cooled down.
High Temperatures
Nozzle
Pressure Vessel
Screw Cap