Important Safety Instructions
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
CAREFUL
Hot steam! Steam will escape from the ventilation
openings for a short time with a possible
triggering of the safety valve.
Risk of scalding!
• Unplug the mains supply plug.
• Place the device in the lock position during
application breaks.
• Keep unauthorised persons away from the device.
• Securely fix the manual unit in the programme
steam outlet.
• Ensure that the escaping steam will not endanger
people, fixtures or equipment.
CAREFUL
Noise Emission!
Steam cleaning devices can cause annoying sounds
during operation.
• Always wear personal ear and hearing protection
equipment during the stay in the workspace.
INFORMATION
The outflow of steam at high velocity causes
electrostatic charge generated by friction to
accumulate on the nozzle as well as on the product to
be cleaned. The electrostatic charge developed on the
handpiece is continuously dissipated via the ground
connection of the device. Depending on external
conditions such as insufficient conductivity of the floor
and/or shoes, dissipation of electrostatic charge of the
product to be cleaned may be impaired.
This absolutely harmless but unpleasant state can be
sensed as “tingling” or “electric shock” (a similar effect
may occur, for example, in carpets or velvet car
seats). The discharge that takes place here can be
observed as a visible spark discharge from the product
to be cleaned to the handpiece.
• It is recommended in such cases to ground the
product to be cleaned or, if necessary, the wrist of
the user (e.g. with an ESD wrist strap).
Hot steam when
triggering the safety
pressure valve
To Next Page
Loading...
