Elma Elmasteam 8 basic - Page 41

Description of the Operating Displays
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
41
Filling Levels
Filling Level (B)
illuminates as
blue
The device is
switched on at
the mains switch
and is
depressurised!
The device is not
completely filled
The filling level of the
device is between minimum
and maximum
The device can be filled
The display goes out as
soon as the pressure is built
up in the device (only for a
device without pump)
Filling Level (B)
light goes out
(When filling)
The device is completely
filled
Do not continue to fill the
device
Filling Level (B)
flashes blue
(Device with
pump)
The filling level in the
canister is low (min.)
Fill the canister
Canister is not connected to
the device
Inspect the connection
cable to the canister
No or too low water
pressure (minimum 1.6 bar)
Open the water supply
and/or inspect water
pressure
Filling Level (B)
flashes blue
(Device without
pump)
Reserve indicator, device
and/or pressure vessel is
nearly empty.
B