Elma Elmasteam 8 basic - Warning and Service Indicator Interpretation

Description of the Operating Displays
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
43
Warnings
Warning (A)
flashes red
Gauge (D)
flashes green
(all scales of
values flashing)
An excess pressure has
been created in the device
Automatic shut-down of the
heating
Switch the device On/Off
Device with compressed air:
Inspect the compressed air
pipes for pressure
(maximum 6 bar)
Inspect whether the device
is in the function Service
(Descale)
Warning (A)
flashes red
The device has built up no
pressure (within a limited
time)
Pressure vessel screw cap
is missing or not completely
closed
Warning: Unplug the mains
supply/switch off the
device/set the function for
steam outlet
The heater is defect: Send
the device to the service
centre
Service (Descale)
Service
(Descale) (C)
illuminates as
orange
1. Command for the device
to descale
Service
(Descale) (C)
flashes orange
2. Command for the device
to descale
Service
(Descale) (C)
flashes orange
Warning Tone
sounds
3. Command for the device
to descale
Warning Tone will
sound for 20 seconds
after switching on, if the
device has not been
A
D
C