Elma Elmasteam 8 basic - Page 59

Handling in Operation
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
59
Utilise approved accessories to ensure secure retention of smaller
work pieces. e.g. forceps, sieve etc.
Before commencing any cleaning works, always inform yourself
about whether the work piece, trinket or orthodontic material to be
cleaned is suitable for this cleaning process.
In particular, the thermal and mechanical load has to be taken into
account.
Keep the work piece at least 1 cm away from the nozzle in the
vapour zone.
Control at frequent intervals the cleaning success (visual
inspection) as well as any possible adverse effects on sensitive
surfaces of the cleaning material.
The user is responsible for the control of the cleaning result.
Holding the work
piece
Approval for
materials to be
cleaned
Distance to the
steam outlet
Cleaning Result