Important Safety Instructions
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
WARNING
Hot vapours/hot liquids
Risk of scalding from steam!
• Only open the pressure vessel screw cap when the device is
depressurised!
• Allow the pressure vessel to cool down before opening the
pressure vessel screw cap!
• Observe the gauge display (Chapter 3.6.3D)! The device
remains under pressure as long as one segment is
illuminated on the value scale on the gauge.
• Only fill with potable water or distilled (DI)! (Descaling as an
INFORMATION
Refer to the Operating Instructions
• Read the operating instructions completely before you
commence working with the device.
• Failure to observe these operating instructions can cause
serious injury or damage to the device.
• Always retain the operating instructions in the vicinity of
the device.
• The operating manual is part of the device. Always
transfer the operating instructions with the device when
you pass the device on to third parties.