54
Start sewing – front bartack, lockstitch and machine will
automatically stop when buttonhole is completed.
Step3
R
Machine stops when
BH is completed.
Auto
3
Restart for the same size.
Different size
Cancel
Sewing Additional Buttonholes
To sew another buttonhole the same size - raise foot,
move fabric, lower foot and sew.
Reset Buttonhole Size
To sew a buttonhole a different size (or to adjust stitch
length), reset the machine by touching “Cancel” key or
reselect buttonhole. Sew new buttonhole size using
same method.
Cutting Open Buttonhole
See page 51.
Troubleshooting Tip
If there is a difference in stitch length (density) between
the right and left sides of the buttonhole, use the fine
adjustment screw. See page 13.
To Next Page
Loading...
