EasyManuals Logo

ELTEX MES23xx User Manual

Default Icon
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
MES53xx, MES33xx, MES23xx Ethernet Switch Series 104
no bridge multicast address
{mac_multicast_address |
ip_multicast_address }
Remove a multicast MAC address from the table.
bridge multicast forbidden
address
{mac_multicast_address |
ip_multicast_address} [{add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}]
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..8)
Deny the connection of the port(s) to a multicast IPv6 address
(MAC address).
- mac_multicast_address - multicast MAC address;
- ip_multicast_address - multicast IP address;
- add - add port(s) into the banned list;
- remove - remove port(s) from the banned list; Interfaces
must be separated by “–” and “,”.
no bridge multicast forbidden
address
{mac_multicast_address |
ip_multicast_address }
Remove a 'deny' rule for a multicast MAC address.
bridge multicast forward-all
{add | remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
By default,
transmission of all
multicast packets is
denied.
Enable transmission of all multicast packets on the port.
- add - add ports/aggregated ports to the list of ports which
are allowed to transmit all multicast packets;
- remove - remove the port group/aggregated ports from the a
'permit' rule.
Interfaces must be separated by “–” and “,”.
no bridge multicast forward-all
Restore the default value.
bridge multicast forbidden
forward-all {add | remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16).
By default, ports are
allowed to dynamically
join a multicast group.
Prohibit the port to dynamically join a multicast group.
- add - add ports/aggregated ports to the list of ports which
are not allowed to transmit all multicast packets;
- remove - remove the port group/aggregated ports from the a
'deny' rule.
Interfaces must be separated by “–” and “,”.
no bridge multicast forbidden
forward-all
Restore the default value.
bridge multicast ip-address
ip_multicast_address {add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Register IP address in the multicast addressing table and
statically add/remove interfaces to/from the group.
- ip_multicast_address - multicast IP address;
- add - add ports to the group;
- remove - remove ports from the group;
Interfaces must be separated by “–” and “,”.
no bridge multicast ip-address
ip_multicast_address
Remove a multicast IP address from the table.
bridge multicast forbidden

ip_multicast_address {add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Prohibit the port to dynamically join a multicast group.
- ip_multicast_address - multicast IP address;
- add - add port(s) into the banned list;
- remove - remove port(s) from the banned list;
Interfaces must be separated by “–” and “,”.
You have to register multicast groups prior to
defining prohibited ports.
no bridge multicast forbidden
ip-address
ip_multicast_address
Restore the default value.
bridge multicast source
ip_address group
ip_multicast_address {add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Set the mapping between the user IP address and a multicast
address in the multicast addressing table and statically
add/remove interfaces to/from the group.
- ip_address - source IP address;
- ip_multicast_address - multicast IP address;
- add - add ports to the source IP address group;
- remove - remove ports from the group of the source IP
address;
no bridge multicast source
ip_address group
ip_multicast_address
Restore the default value.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX MES23xx and is the answer not in the manual?

ELTEX MES23xx Specifications

General IconGeneral
BrandELTEX
ModelMES23xx
CategorySwitch
LanguageEnglish

Related product manuals