MES53xx, MES33xx, MES23xx Ethernet Switch Series 105
bridge multicast forbidden
source ip_address group
ip_multicast_address {add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Disable adding/removal of mappings between the user IP
address and a multicast address in the multicast addressing
table for a specific port.
- ip_address - source IP address;
- ip_multicast_address - multicast IP address;
- add - prohibit adding ports to the source IP address group;
- remove - disable port removal from the source IP address
group;
no bridge multicast forbidden
source ip_address group
ip_multicast_address
Restore the default value.
bridge multicast ipv6 mode
{mac-group | ip-group |
Set the multicast data transmission mode for IPv6 multicast
packets.
- mac-group - multicast transmission based on VLAN and MAC
addresses;
- ip-group - multicast transmission with filtering based on
VLAN and the recipient address in IPv6 format;
- ip-src-group - multicast transmission with filtering based on
VLAN and the sender address in IPv6 format;
no bridge multicast ipv6 mode
bridge multicast ipv6
ipv6_multicast_address {add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Register multicast IPv6 address in the multicast addressing
table and statically add/remove interfaces to/from the group.
- ipv6_multicast_address - multicast IP address;
- add - add ports to the group;
- remove - remove ports from the group;
Interfaces must be separated by “–” and “,”.
no bridge multicast ipv6
ipv6_multicast_address
Remove a multicast IP address from the table.
bridge multicast ipv6
forbidden ip-address
ipv6_multicast_address {add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Deny the connection of the port(s) to a multicast IPv6 address.
- ipv6_multicast_address - multicast IP address;
- add - add port(s) into the banned list;
- remove - remove port(s) from the banned list;
Interfaces must be separated by “–” and “,”.
no bridge multicast ipv6
forbidden ip-address
ipv6_multicast_address
Restore the default value.
bridge multicast ipv6 source
ipv6_address group
ipv6_multicast_address {add |
remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Set the mapping between the user IPv6 address and a
multicast address in the multicast addressing table and
statically add/remove interfaces to/from the group.
- ipv6_address - source IP address;
- ipv6_multicast_address - multicast IP address;
- add - add ports to the source IP address group;
- remove - remove ports from the group of the source IP
address;
no bridge multicast ipv6
source ipv6_address group
ipv6_multicast_address
Restore the default value.
bridge multicast ipv6
forbidden source ipv6_address
group ipv6_multicast_address
{add | remove}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Disable adding/removal of mappings between the user IPv6
address and a multicast address in the multicast addressing
table for a specific port.
- ipv6_address - source IPv6 address;
- ipv6_multicast_address - multicast IPv6 address;
- add - prohibit adding ports to the source IPv6 address group;
- remove - disable port removal from the source IPv6 address
group;
no bridge multicast ipv6
forbidden source ipv6_address
group ipv6_multicast_address
Restore the default value.