– Clogged filter cartridge (1 and 2) (this would be unlikely though)
– One of the valves (V1) or (V2) receives no power (24V DC)
NOTE
The valve (V1) will only be supplied with voltage (24V DC) until the lift has reached the bottom
position, then it will be switched off.
One of the valves (V1) or (V2) jumps, most likely valve (V1)
– Clean the valves.
Pos: 3.30 /0025 Üb erschriften/E LTRA 1.1 Übersc hriften/11 N o or low oxyge n pressure ELTRA @ 6\mod_1 36869509029 1_9.docx @ 4108 6 @ 2 @ 1
3.15 No or low oxygen pressure
Pos: 3.31 /0010 E LTRA/0015 s ervice_instructio ns/CS-2000_s ervice/05Faults_C S-2000/0 585 Modul No or lo w oxygen press ure @ 9\mo d_142554016 3981_9.docx @ 74 285 @ 333 44 @ 1
Possible faults: