Danger of poisoning
Toxic combustion gases
− The samples are exposed to high temperatures during analysis. In this
process, harmful gaseous fission products can be released or formed from
reaction processes. These gases can escape from the gas outlet or the
furnace and cause severe poisoning.
• Connect the exhaust air outlet of the device to a suitable ventilation
system.
• Please wear your personal protective equipment.
• Please observe the safety data sheets in terms of the substances
used.
• Carry out a risk analysis regarding the hazard potential of your
samples and implement relevant protective measures.
Risk of life-threatening injuries
Falling loads
− The device may only be transported or lifted with suitable aids, such forklift
or crane. Loads can fall down and cause life-threatening injuries.
• Lift and transport the device exclusively by means of suitable aids,
such as forklift or crane.
• Secure the device during transport with suitable safety belts (supplied
straps).
• Please observe the centre of gravity of the device (on the right side of
the device).
• Keep a safe distance during transport.
• Never walk or stand under suspended loads.
Danger to life from electric shock
Cleaning of the device
− Any cleaning work with water on the device can lead to life-threatening
injuries from electric shock, if the device is not disconnected from the power
supply.
• Only perform cleaning work with water on the device when the device
is disconnected from the power supply.
To Next Page
Loading...
Need help?
General
