EasyManua.ls Logo

ELTRA ELEMENTRAC ONHp2 - Setting up

ELTRA ELEMENTRAC ONHp2
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
25
4.2 Setting up
WARNING
W10.0000
Risk of life-threatening injuries
Falling loads
The device may only be transported or lifted with suitable aids, such forklift
or crane. Loads can fall down and cause life-threatening injuries.
Lift and transport the device exclusively by means of suitable aids,
such as forklift or crane.
Secure the device during transport with suitable safety belts (supplied
straps).
Please observe the centre of gravity of the device (on the right side of
the device).
Keep a safe distance during transport.
Never walk or stand under suspended loads.
Caution
C18.0107
Weight:165 kg The centre of gravity of the device is located on the right side.
Dimensions (WxHxD):56 x 78 x 64 cm
CAUTION
C19.0092
Falling device
Incorrect installation or insufficient workplace
The weight of the device can cause personal injury if it falls down.
Only operate the device on a sufficiently large, sustainable, slip-
resistant and stable workplace.
Please ensure that all feet of the device have a secure footing.
The space which is required to set up the device ELEMENTRAC ONHp2 ONH-p 2 with scale and
PC is approx. 190 cm × 75 cm (width × depth) and approx. 100 cm × 75 cm without scale and
PC. The required space with Autocleaner is identical.
The device table must safely withstand the weight of the device (please see Technical data“).The
mains plugs must be easily accessible at all times. The surface of the device table must be slip-
resistant as well as fire-proof.

Table of Contents

Related product manuals