The device is set up as follows:
1. Place the device at the prepared location.
2. Please make sure that you position the device in such a way that the fans are not blocked.
3. Set up the PC, monitor, keyboard and scales in the desired location in such a way that
the analyser can be easily seen.
4. Please make sure that the device is secure and stable.
5. Please ensure that the surface of the installation site is slip-resistant as well as fire-proof.
6. Please ensure that no crucibles can roll off the support.
7. Please make sure that there are no flammable objects or materials (working papers, files)
in the vicinity of the analyser.
The device is set up.
To Next Page
Loading...
