6
EMC VNX5500 File Installation Guide
Overview of installing in a customer cabinet
If your system was shipped in a mini-rack:
1. Read and complete the prerequisite tasks listed in “Before you begin” on page 7.
2. Unpack the shipping boxes and verify the shipping contents as described in “Unpack your
system” on page 9.
3. Remove the mini-rack contents as described in “Removing mini-rack components” on
page 11.
4. Assemble the components as described in “Assemble components in your cabinet” on
page 15 in your cabinet by first installing the rails and then installing each system component.
5. Cable your system as described in “Cable your system” on page 27.
6. Power up your system by connecting power cables, and then verify that the system powered
up correctly by checking the LEDs of the components as described in “Power up” on page 41.
7. Optionally, you can add a disk-array enclosure (DAE), power it up, and then verify that the DAE
was powered up correctly by checking the DAE LED status as described in “Add additional
storage” on page 47.
8. Complete the tasks listed in “Set up” on page 59.
To Next Page
Loading...
