Check system health
61
Downloading USM documentation
1. Go to https://Support.EMC.com and download the
Unisphere Service Manager Requirements
and Installation
document available on the VNX product page.
2. For additional information on using USM, go to https://mydocs.emc.com/VNX/
.
3. Under VNX tasks, select Update VNX software.
4. Select appropriate settings for your configuration to generate a customized procedure.
Downloading Unisphere Service Manager
1. Go to https://Support.EMC.com and select VNX Series > Install and Configure.
2. From VNX Installation Tools, download Unisphere Service Manager.
3. Save the executable to your management station.
4. From the folder where you downloaded the executable, double-click the file and follow the
wizard’s steps to install USM.
5. On the Install Complete screen, leave the Launch Unisphere Service Manager checkbox
selected.
6. Click Done. Unisphere Service Manager opens.
7. Connect to your system by entering the host name or IP address and click Connect.
Downloading the latest the VNX operating environment software
1. Select Software > System Software.
2. Run the Prepare for Installation wizard to check for an updated version of the VNX OE.
3. If available, then run the Install Software wizard to install the update.
Registering your system with your service provider
1. Run the Storage System Registration wizard in Unisphere service Manager.
2. From within the USM, select Register > Register Storage System.
3. Follow the steps in the wizard to complete the registration process.
You can also use USM at this time to:
◆ Install and update Firmware
◆ Install language packs (if purchased)
◆ Install software enablers (if purchased)
Check system health
Login to Unisphere to check the health of your system including alerts, event logs, and statistics.
To Next Page
Loading...
