Emerson 8800C - Page 123

A-21
Reference Data
Remote Mounting Kits
(Includes All Parts Needed to Retrofit an Integral Transmitter and Meter Body to Mount the
Electronics Remotely)
Remote Mounting Kit with 10 ft. (3,0m) Cable 08800-5051-2010
Remote Mounting Kit with 20 ft. (6,1m) Cable 08800-5051-2020
Remote Mounting Kit with 30 ft. (9,1m) Cable 08800-5051-2030
Remote Mounting Kit with Customer-Specified Cable Length. Up to 75 ft. (23 m).
(2)
08800-5051-20XX
Remote Mounting Hardware (Excluding Cable) 08800-5055-0002
Remote Mounting Cables (Includes Cable with End Assemblies Installed)
10 ft. (3,0m) Cable 08800-5045-2010
20 ft. (6,1m) Cable 08800-5045-2020
30 ft. (9,1m) Cable 08800-5045-2030
Cable with Customer-Specified Cable Length. Up to 75 ft. (23 m).
(2)
08800-5045-20XX
Integral Mounting Kit
(Includes All Parts Needed to Retrofit a Remote Meter to Mount the Electronics Integrally) 08800-5639-0002
ASME Wafer Alignment Rings (Two Required)
1
/2 in. (15 mm): ASME B16.5 (ANSI) Class 150, 300, and 600 Flanges 08800-0521-0001
1 in. (25 mm): ASME B16.5 (ANSI) Class 150, 300, and 600 Flanges 08800-1021-0001
1
1
/2 in. (40 mm): ASME B16.5 (ANSI) Class 150, 300, and 600 Flanges 08800-1521-0001
2 in. (50 mm): ASME B16.5 (ANSI) Class 150, 300, and 600 Flanges 08800-2021-0001
3 in. (80 mm): ASME B16.5 (ANSI) Class 150, 300, and 600 Flanges 08800-3021-0001
4 in. (100 mm): ASME B16.5 (ANSI) Class 150, 300, and 600 Flanges 08800-4021-0001
4 in. (100 mm): ASME B16.5 (ANSI) Class 600 Flanges 08800-4021-0002
6 in. (150 mm): ASME B16.5 (ANSI) Class 150 and 300 Flanges 08800-6021-0001
6 in. (150 mm): ASME B16.5 (ANSI) Class 600 Flanges 08800-6021-0002
8 in. (200 mm): ASME B16.5 (ANSI) Class 150 and 300 Flanges 08800-6221-0001
8 in. (200 mm): ASME B16.5 (ANSI) Class 600 Flanges 08800-6221-0002
(1) One spare part is recommended for every 25 flowmeters in Category A, and 50 flowmeters in Category B
(2) XX=Customer specified length in feet
Table A-7. Spare Parts List
Part Description Spare Category
(1)
Part Number