Emerson 8800C - Page 124

Rosemount Model 8800C Vortex Flowmeter
A-22
Part Description Part Number
DIN Wafer Alignment Rings (Two Required)
1
/2 in. (15 mm): DIN PN 10/16, 25/40, 64 and 100 Flanges 08800-0523-0001
1 in. (25 mm): DIN PN 10/16, 25/40, 64 and 100 Flanges 08800-1023-0001
1
1
/2 in. (40 mm): DIN PN 10/16, 25/40, 64 and 100 Flanges 08800-1523-0001
2 in. (50 mm): DIN PN 10/16, 25/40, 64 and 100 Flanges 08800-2023-0001
3 in. (15 mm): DIN PN 10/16, 25/40, 64 and 100 Flanges 08800-3023-0001
4 in. (100 mm): DIN PN 10/16 and 64 Flanges 08800-4023-0001
4 in. (100 mm): DIN PN 25/40 and 100 Flanges 08800-4023-0002
6 in. (150 mm): DIN PN 10/16 and 64 Flanges 08800-6023-0001
6 in. (150 mm): DIN PN 25/40 and 100 Flanges 08800-6023-0002
8 in. (200 mm): DIN PN 10/16 Flanges 08800-6223-0001
8 in. (200 mm): DIN PN 25/40 Flanges 08800-6223-0002
8 in. (200 mm): DIN PN 64/100 Flanges 08800-6223-0003
JIS Wafer Alignment Rings (Two Required)
1
/2 in. (15 mm): JIS 10k, 20k, 40k 08800-0524-0001
1 in. (25 mm): JIS 10k, 20k, 40k 08800-1024-0001
1
1
/2 in. (40 mm): JIS 10k, 20k, 40k 08800-1524-0001
2 in. (50 mm): JIS 10k, 20k 08800-2024-0001
2 in. (50 mm): JIS 40k 08800-2024-0002
3 in. (80 mm): JIS 10k 08800-3024-0001
3 in. (80 mm): JIS 20k, 40k 08800-3024-0002
4 in. (100 mm): JIS 10k 08800-4024-0001
4 in. (100 mm): JIS 20k, 40k 08800-4024-0002
6 in. (150 mm): JIS 10k, 20k 08800-6024-0001
6 in. (150 mm): JIS 40k 08800-6024-0002
8 in. (200 mm): JIS 10k, 20k 08800-6224-0001
8 in. (200 mm): JIS 40k 08800-6224-0002
Spacers for Model 8800C Wafer SST Meters
(Used for maintaining 8800A face-to-face dimensions) (One Required)
1
1
/2 in. (40 mm): ASME B16.5 (ANSI) 150 to 600 08800-5711-0151
2 in. (50 mm): ASME B16.5 (ANSI) 150 to 600 08800-5711-0201
3 in. (80 mm): ASME B16.5 (ANSI) 150 to 600 08800-5711-0301
4 in. (100 mm): ASME B16.5 (ANSI) 150 to 300 08800-5711-0401
4 in. (100 mm): ASME B16.5 (ANSI) 600 08800-5711-0402