Emerson Daniel Danalyzer 1000 - 4 0 Operation from Local Keyboard and Display; Interface Components for Local Data Display and Entry; Light Emitting Diode (LED) Indicators

MODEL 1000 SEP 2005
OPERATION FROM LOCAL KEYPAD AND DISPLAY
4-3
Figure 4-1. LED Lights, LCD, and Keypad for Local Data Display and Entry
4.1 INTERFACE COMPONENTS FOR LOCAL DATA DISPLAY AND ENTRY
The components for local data display and entry are the light emitting diode (LED) indicator lights,
the liquid crystal display (LCD), and the built-in keypad (see Figure 4-1).
4.1.1 Light Emitting Diode (LED) Indicators
There are three colored status indicators on the GC Controller that show the gross status of the total
system. Table 4-1 summarizes the conditions indicated when these indicators are illuminated:
Table 4-1. Conditions indicated by the GC Controller's LED status indicator lights
YELLOW The GC has an unacknowledged alarm(s).
GREEN The Controller is currently running an analysis.
RED The GC is in RUN mode, and has an out-of-tolerance
or alarm condition that requires an operator action.