MODEL 1000 SEP 2005
EQUIPMENT DESCRIPTION
2-1
2.0 EQUIPMENT DESCRIPTION
This section provides descriptions of the various subsystems and components that make up the
Model 1000 Gas Chromatograph System. This section is organized as follows:
Sampling System ................................................. See Section 2.1
Sampling Point Location .............................................. 2.1.1
Sample Volume and Flow Rate ......................................... 2.1.2
Sample Conditioning ................................................. 2.1.3
Contamination Precautions ............................................ 2.1.4
Valving............ ......... ......... ............ ......... ......... 2.1.5
Calibration Gas ..................................................... 2.1.6
Analyzer ...................................................... See Section 2.2
Physical Description ................................................. 2.2.1
Chromatograph Valves ............................................... 2.2.2
Primary Plate .................................................. 2.2.2.1
Actuating Subassemblies ......................................... 2.2.2.2
Operation ......... ......... ......... ............ ......... ..... 2.2.2.3
Detector Subsystem .................................................. 2.2.3
Analyzer Preamplifier Unit ............................................ 2.2.4
Analyzer Specifications ............................................... 2.2.5
Utility Gas Requirements .............................................. 2.2.6
Controll er ...................................................... See Section 2.3
Controller Hardware Configurations ..................................... 2.3.1
Analog Inputs and Outputs ........................................ 2.3.1.1
Digital Inputs and Outputs ........................................ 2.3.1.2
Communications ......... ......... ......... ............ ......... 2.3.1.3
Driver Outputs ................................................. 2.3.1.4
General Controller Specifications ................................... 2.3.1.5
Electrical/Mechanical Safety and Integrity -
Certifications and Classifications ................................... 2.3.1.6
GC Controller Circuit Board List ................................... 2.3.1.7
Optional Keyboard and Display......................................... 2.3.2
Keypad ............ ......... ......... ............ ......... .... 2.3.2.1
Display ....................................................... 2.3.2.2
Alarm Specifications ................................................. 2.3.3
Status Indicators ................................................ 2.3.3.1
To Next Page
Loading...
