Emerson Daniel Danalyzer 1000 - Logging on to View or Edit Data; First Time Log-On

MODEL 1000 SEP 2005
OPERATION FROM LOCAL KEYPAD AND DISPLAY
4-7
4.2 LOGGING ON TO VIEW OR EDIT DATA
4.2.1 First Time Log-On
To log on the first time, proceed as follows:
(1) Press the ENTER key to display the "Enter PIN: x" prompt.
(2) Type in the letters for your username, then press the ENTER key.
VERY IMPORTANT Each new Emerson GC unit is shipped with one "Super-user" named
EMERSON downloaded into its memory. Therefore, for the first log-on to a new GC unit,
enter the USERNAME: EMERSON.
To enter the username "EMERSON",
(1) Type in "E": Press and hold down the key, press the key twice, then release the
key.
(2) Type in "M": Press and hold down the key, press the key once, then release the
key.
(3) Type in "E": Press and hold down the key, press the key twice, then release the
key.
(4) Type in "R": Press and hold down the key, press the key three times, then release
the key.
(5) Type in "S": Press and hold down the key, press the key once, then release the
key.
(6) Type in "O": Press and hold down the key, press the key three times, then release
the key.
(7) Type in "N": Press and hold down the key, press the key twice, then release the
key.