SEP 2005 MODEL 1000
SUPPLEMENTAL WIRING GUIDE - SERIAL COMMUNICATIONS
A-6
A.2.3 Phoenix Plug Port of GC to DB-9 Port of PC
To make an RS-232 serial connection between one of the Phoenix Plug serial ports of the GC, and
a PC with DB-9 serial port, you will need to manufacture the cable and its DB-9, female plug cable
end as illustrated below (see Figure A-5).
Figure A-5. GC Phoenix Plug Port to PC DB-9 Port
The cable for this application is also available from (P/N 3-2350-068) in a customer-specified
length, with six exposed leads and a female DB-9 plug.
To Next Page
Loading...
