SEP 2005 MODEL 1000
MAINTENANCE
5-38
5.8.3 Changing the Bargraph
Use this function to designate which AEM output analog signals can be used to drive the bargraph
device inputs. Each of the 16 available AEM output signals can be assigned to represent various GC
analysis data variables.
1. To edit the variables and corresponding settings displayed by the bargraph, click on the
BARGRAPGH button or press the F5 key.
a. The Bargraph dialog box appears.
b. To edit the settings displayed, double-click on the appropriate cell or click and use
the provided pull-down menus. See Section 5.8.1 for more details.
Multiple streams can be entered by separating the stream numbers with commas (e.g., 2,3).
Bargraph results will be produced for each stream.
To Next Page
Loading...
