MODEL 1000 SEP 2005
RECOMMENDED SPARE PARTS
6-1
6.0 RECOMMENDED SPARE PARTS
Following are lists of recommended spares for approximately a year's maintenance of the Model
1000 GC System. Maximum quantities are the number of spares that is normally adequate to cover
most contingencies at facilities where a larger number of Model 1000/2350A GC Systems are in
operation. The minimum quantities are the number of spares at facilities with only a few Model
1000 GC Systems.
Daniel Measurement Services (DMS), a division of Emerson Process Management, offers service
and repair service contracts that make maintaining most spares for the Model 1000 GC System
unnecessary. Details regarding Daniel Measurement Services’ contracts may be obtained by
contacting the Daniel Measurement Services’ Service Department at the address or telephone
number on the Customer Repair Report in the back of this manual.
6.1 ANALYZER SPARES
6.1.1 Printed Circuit Card Assemblies (Analyzer)
Description Part Number Maximum Minimum
Preamplifier assembly 3-0500-201 1 1
Temperature control assembly 3-0500-202 1 1
Decoder assembly 3-0500-200 1 1
Valve driver assembly 3-0500-178 1 1
To Next Page
Loading...
