MODEL 1000 SEP 2005
OPERATION FROM LOCAL KEYPAD AND DISPLAY
4-17
4.3.5 Chromatogram Menu
The CHROMATOGRAM menu allows the operator to view a live chromatogram while the GC
System is conducting analysis runs.
Chromatogram
1 Live
4.3.6 GC Control Menu
The GC CONTROL menu enables the operator to stop, calibrate, or place on automatic control a
sample stream from the Analyzer. This may occur a number of times while modifying inputs in the
OPERATOR INPUTS menu. Entering "HALT" will allow the Analyzer to finish the presently
running operating sequence. Entering "STOP NOW" orders the Analyzer to stop immediately and
may require that some parameters be reentered. In most cases the GC Control menu will operate in
the "AUTO" mode.
GC Control
1 Auto
2
3
4
5
Single Stream
Calibration
Halt
Stop Now
To Next Page
Loading...
