SEP 2005 MODEL 1000
OPERATION FROM LOCAL KEYPAD AND DISPLAY
4-16
4.3.3 Operator Entries Menu
The submenus of the OPERATOR ENTRIES menu enable an operator to adjust and refine the
entries normally specified in the application as it leaves the factory. Modifications may be made in
entries from the Component Data Table (CDT), Retention Times (RT), Response Factors (RF), etc.
for various components and streams. These submenus may be used to adjust or define timed events,
analysis and cycle times for sample streams, designate system names and define the calculations
desired. Names or labels can be specified for data that may be desired for the various reports. These
submenus allow the operator to refine and customize the applications for the desired usage.
Operator Entries
1 Component Data
2
3
4
5
6
Timed Events
Analysis/Cycle Times
System
Calculation Control
User Defined
4.3.4 Alarms Menu
The ALARMS menu allows the operator to view, set limits and respond to various alarms.
Alarms
1 Limit Alarms
2
3
4
Discrete Alarms
Active Alarms
Unackd Alarms
To Next Page
Loading...
