SEP 2005 MODEL 1000
OPERATION FROM LOCAL KEYPAD AND DISPLAY
4-14
4.3 LOCAL DISPLAY MENUS
The local display Main Menu has seven items listed, each of which branches into another menu.
This is illustrated below in the menu tree diagram, Figure 4-4, and explained further in the sections
that follow.
Main Menu
1 Hardware 1 Streams
2 Analog Inputs
3 Analog Outputs
4 Discrete Inputs
5 Discrete Outputs
6 Valves
7 Current GRI Values
2 Operator Entries 1 Components
2 Timed Events
3 Analysis/Cycle Time
4 System
5 Calculation Control
6 User Defined
3 Alarms 1 Limit Alarms
2 Discrete Alarms
3 Active Alarms
4 Unackd Alarms
4 Chromatogram 1 Live
5 GC Control 1 Auto
2 Single Stream
3 Calibration
4 Halt
5 Stop Now
6 Data Records 1 Raw Data
2 Raw Data 2
3 Raw Data 3
4 Analysis
5 Cal Results
6 Stream Data
7 Config Rpt - Maint. Log 1 Reports
2 PC Config. Report
3 Maintenance Log
Figure 4-4. Menu Tree for Local GC Controller Keypad and Display.
To Next Page
Loading...
