SEP 2005 MODEL 1000
DESCRIPTION
1-10
1.5.2 Capabilities
Individual gas chromatograph Controller functions that can be initiated or controlled by the GC
System and its software, MON2000, include (but are not limited to) the following:
valve activations
timing adjustments
stream sequences
heater controls (when applicable)
calibrations
baseline runs
analyses
halt operation
stream/detector assignments
stream/component table assignments
stream/calculation assignments
diagnostics
alarm and event processing
event sequence changes
component table adjustments
calculation adjustments
alarm parameters adjustments
analog scale adjustments
Reports and logs that can be produced, depending upon the GC Application in use, include (but are
not limited to) the following:
configuration report
parameter list
analysis chromatogram
chromatogram comparison
alarm log (unacknowledged and active)
event log
analysis raw data
To Next Page
Loading...
