MODEL 1000 SEP 2005
MAINTENANCE
5-35
5.8.1 Analog Output Dialog Description
1. Use the Application > Analog Outputs menu path to access this function.
2. The Analog Outputs dialog box appears.
To edit the settings displayed, double-click on the appropriate cell or left-click the mouse
button and use the provided pull-down menus.
When assigning analog outputs, first check the CGM Analog Output Config field in the
System dialog box (see Section 5.1). An analog output assignment that uses the same analog
output number as the CGM setting will produce erratic CGM trace output, possibly with
incorrect scaling.
See the following table for details.
To Next Page
Loading...
