SEP 2005 MODEL 1000
MAINTENANCE
5-36
Table 5-5. Description of Analog Output Settings
Setting Description
< Number> number label assigned
Number of available analog outputs is dependent upon the
GC controller model.
Note: If the GC unit includes an Analog Expansion Module
(AEM), PN 1-0500-001, reserve analog output number 1 (first
row) for the variable Bargraph.
< Variable> type of GC analysis data on which to base signal level of analog
output
< Stream> name of stream monitored by this output
<Component> name of component monitored by this output
<Current Value> current readout values of the analog output (values reflect scale
assignments)
<Zero Scale> value used to represent the minimum value (4mA) when scaling the
analog output value
<Full Scale> value used to represent the maximum value (20mA) when scaling
the analog output value
<Fixed/Var> analog output operation mode
Fixed = fixed
Var = variable
If the operation mode is fixed, the analog output is set to the number
entered for the Fixed Value.
<Fixed Value> analog output value used during fixed operation
<Zero Adjustment> value used to correct Zero Scale
<Full Adjustment> value used to correct Full Scale
3. Click on the OK button to accept your changes and return to the main window.
4. Click on the CANCEL button to abort and return to the main window.
To Next Page
Loading...
