Emerson Daniel Danalyzer 1000 - Page 184

SEP 2005 MODEL 1000
MAINTENANCE
5-16
Table 5-2. Analyzer Troubleshooting Checklist
AS FOUND AS LEFT NOMINAL
ANALYZER
Leak check with SNOOP from
®
carrier gas bottle to Analyzer
regulator.
Leak check with SNOOP from
®
calibration standard to auto-
calibration solenoid.
Pre-amp balance voltage (see par.
5.5.6)
_____ mV _____ mV 0 ±0.5 mV
SAMPLE SYSTEM
Leak check with SNOOP from
®
sample probe to sample solenoid
MODEL 1000 INPUTS
GC
1
2
3
4
GRI
0.0 to 0.0
0.8 to 1.1
0.8 to 1.1
0.8 to 1.1
PAZ (12-bit AD)
600 to 800
600 to 800
600 to 800
1150 to 1500
Value (12-bit AD)
0 to 4095
0 to 4095
0 to 4095
0 to 4095
PAZ (16-bit AD)
4800 to 6400
4800 to 6400
4800 to 6400
9200 to 12000
Value (16-bit AD)
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767