Emerson Daniel Danalyzer 1000 - Page 249

MODEL 1000 SEP 2005
GUIDE TO TRANSIENT PROTECTION MODULES
C-3
Table C-1. Transient Protection Modules Installed on the Terminal Board for Field Wiring
APPLICATION PART NO. PART DESCRIPTION M# SOCKETS (channel)
COMM, RS-232 3-2350-027 Quad Bi-dir Sngl Tnst - M6 (COM1)
- M11 (COM2)
- M4 (COM3)
- M7 (COM4)
COMM, RS-422 3-2350-027 Quad Bi-dir Sngl Tnst - M11 (COM2)
- M4 (COM3)
COMM, RS-485 3-2350-027 Quad Bi-dir Sngl Tnst - M6 (COM1)
- M11 (COM2)
- M4 (COM3)
- M7 (COM4)
CONTROLLER / ANALYZER
INTERCONNECT
3-2350-002
3-2350-003
Quad Sngl Tnst - M9 (Fnct. codes)
- M15 (FC Strobe, A-
Zero, Alarm)
- M1 Pre-AMP Angl’s
STREAM SWITCH 3-2350-002 Quad Sngl Tnst - M16 (Sol. 1-4)
- M10 (Sol. 5-8)
in
DIGITAL I/O (LOW CURRENT) 3-2350-002 Quad Sngl Tnst - M5 (D 1)
in
- M14 (D 2-5)
out
- M5 (D 5)
NOTES: 16-pin.
out
DIGITAL I/O (LOW CURRENT) 3-2350-003 Quad Diff Tnst - M8 (D 1-4)
in
ANALOG I/O 3-2350-003 Quad Diff Tnst - M1 (A 1-4)
in
- M13 (A 5-8)
out
- M12 (A 1-2)
out
- M3 (A 3-6)
out
- M2 (A 7-10)
NOTES: 20 pin.
in
DIGITAL I/O (HIGH CURRENT) 3-2350-TBD Hi Pwr Discrete Output - M5 (D 1)
in
- M14 (D 2-5)
out
- M5 (D 5)
NOTES: 16-pin.
out
DIGITAL I/O (HIGH CURRENT) 3-2350-019 Hi Pwr Discrete Output - M8 (D 1-4)
NOTES: 20 pin.