Emerson Rosemount 2410 - Page 39

Tankbus Segment coupler
In case “daisy-chain” connection is not suitable, a Tankbus Segment Coupler
(10)
can be
used to connect the various devices.
Features:
• Entity and FISCO compliant
• adjustable short-circuit limit
• robust die-cast aluminium housing
• protection degree IP67
• integrated bus terminating resistor (switch integrated inside the housing)
• cable shielding: capacitive or direct connection to housing potential selectable via
switch
Note
Sufficient equipotential bonding of the installation must be ensured. The device is
connected via the bolt on the housing to the system’s potentializer.
Figure 3-4: Dimensions (mm)
122
64
36
45
173.5
185.5
207
(10) Part no. 6853511-493. Contact Emerson Automation Solutions/Rosemount Tank Gauging for more information.
Reference Manual Installation
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 39