Table 5-5: LEDs Are Used for Error Indication at Rosemount 2410 Start-up
Error type Status LED Error LED Description
Hardware Blinking Blinking Status and Error are blinking simultaneously
Checksum Blinking Blinking Status and Error are toggling
Other On Blinking Unknown error
5.5.2 Error LED
In normal operation the Error LED (Red) is turned off. In case a device error occurs, the LED
will flash a sequence that corresponds to the error code followed by a five second pause.
Figure 5-4: Error Codes are Presented by the Error LED
A. Error LED (Red)
The following errors codes may appear:
Reference Manual Operation
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 75
To Next Page
Loading...
