Emerson Process Management GmbH & Co. OHG4-12
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
Fig. 4-8: Converter lling sequence
4.3 Vapor Recovery Application - Special Information
5. Remove the end cap.
6. Remove the washer.
Behind the washer, the vessel is lled with
converter material.
7. Remove this old material and ll the vessel
with new converter material, considering
to
• hold the vessel vertically while lling
• completely ll the vessel
• keep the inner pipe free of converter
material.
8. Put the washer on top of the vessel / new
material.
9. Install the end cap.
To Next Page
Loading...
Need help?
General
