Emerson Rosemount Xstream Series Instruction Manual Addendum

Emerson Process Management GmbH & Co. OHG1-4
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
1.5 Compliances
1.5 Explosion Protection Compliances
These products are available in two different
variations, separately certied by agencies
for the use in hazardous (classied) areas:
The one variation, to be equipped with cable
glands, is certied by Fyzikálně technický
zkušební ústav, s.p (FTZÚ), an European
Notied Body under the Directive 94/9/EC
(„ATEX“) and conforms to the provisions of
EN 60079-0 and EN 60079-1. See appen-
dix for a copy of the EC type examination
certicate.
The second variation, to be equipped with
metric-to-NPT adapters and conduits (these
components are not part of the instrument
certication), is certied by the Canadian
Standards Association, an „OSHA Nationally
Recognized Testing Laboratory“ (NRTL), for
Canada and USA and conforms to the pro-
visions of CAN/CSA-E60079-0:02 (R2006),
CAN/CSA-E60079-1:02 (R2006), ANSI/
ISA-12.00.01-2002 (IEC 60079-0 Mod), ANSI/
ISA-12.22.01-2002 (IEC 60079-1 Mod). Fur-
thermore, these X-STREAM X2FD analyzers
are certied for use in Class I, Division 2,
Group BCD T3 areas.
See appendix for a copy of the CSA Certicate
of Compliance.
IECEx certication enables worldwide appro-
vals with minimized need of testing.
The following certication markings apply to
the products:
European Union (EU, ATEX)
Category 2, Zone 1:
Ex d IIB+H
2
T4 Gb
EC ATEX Type Examination Certicate:
FTZU 08 ATEX 0028 X.
IECEx
Ex d IIB+H
2
T4 Gb
Conforms to the provisions of the „Equipment
intended for use in Potentially Explosive At-
mospheres (ATEX)“ Directive 94/9/EC, EMC
Directive 2004/108/EC and CE Directive
93/68/EEC.
USA
Class I, Zone 1, AEx d IIB+H
2
T3
Class I, Division 2, Group BCD T3
Canada
Class I, Zone 1, Ex d IIB+H
2
T3
Certicate of Compliance 1714037X

Emerson Rosemount Xstream Series Specifications

General

Brand	Emerson
Model	Rosemount Xstream Series
Category	Measuring Instruments
Language	English