Emerson Process Management GmbH & Co. OHG 2-1
2
Installation
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
Chapter 2
Installation
On receipt, check the packaging and its contents thoroughly for damage.
Inform the carrier immediately of any damage to packaging or contents, and keep dama-
ged parts until clarication.
Store the instrument at a dry and clean place, considering the acceptable environmental conditions.
We recommend to keep the packaging available for future transportation, because only the ori-
ginal packaging ensures proper protection!
HAZARDS FROM MISSING INFORMATION
Compare the content of your package with the pictures below.
Analyzers for hazardous areas need additional parts, described in the
accompanying documentation refering to hazardous area installations.
Call your local sales ofce if something is missing, and DO NOT continue
to install your analyzer, until all parts are at hand!
2.1 Scope of Supply
USB
stick
Trace oxygen cell
(if applicable)
Analyzer
Instruction manuals:
- This manual addendum
- X-STREAM XE instruction manual (on
USB stick)
Allen key for ange screws
Cable glands for ATEX ap-
proved analyzers (amount
meets number of non
sealed threads).
Metric-2-NPT adaptors for
CSA approved analyzers
(amount meets number of
non sealed threads).
Fig. 2-1: Scope of Supply
To Next Page
Loading...
Need help?
General
