Emerson Rosemount Xstream Series Instruction Manual Addendum

Emerson Process Management GmbH & Co. OHG4-6
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
4.2 Replacement of Parts
EXPLOSION HAZARD BY REPLACEMENTS PARTS
Replacement of parts found defective is permitted only by using original
parts!
Violation voids the approvals and may cause explosions!
4.2 Replacement of Parts
Specically for ATEX approved analyzers
Cable glands
NOT FOR analyzers for
vapor recovery applications!
Any ATEX approved ameproof type without
compound, suitable according EN 60079-14,
e. g.
- 8163/2 A2F M20 by Stahl
Cable glands
suitable for all ATEX
approved variations
Any ATEX approved ameproof type with
compound, suitable according EN 60079-14,
e. g.
- ADE 1FC ISO 20 No. 05 by CAPRI, or
- 8163/2–PXSS2K M20 by Stahl
Cable entries stopping plugs
Any ATEX approved ameproof type, e. g.
- 120209 by CAPRI
Male thread: M20 x 1,5
Spare part # ETC01754
Parts beside the cast enclosure, the safety of the X-STREAM XEFD relies on:

Emerson Rosemount Xstream Series Specifications

General

Brand	Emerson
Model	Rosemount Xstream Series
Category	Measuring Instruments
Language	English