Emerson Rosemount Xstream Series Instruction Manual Addendum

Emerson Process Management GmbH & Co. OHG3-28
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
3.10 Web Browser
IP address for Ethernet1 connector
Info
Firmware 1.0
DSP version 1.0
Serial no 123456789
Components..
Installed options..
Ethernet1 IP 123.456.78.9
Ethernet2 IP 192.168.1.2
 Time
10/01/10 14:00
Fig. 3-4: Ethernet Connectors
To gain access to the instrument´s web brow-
ser interface, rst ensure the instrument is
powered and connected to your network via
Ethernet1 connector (Fig. 3-4)
By factory default settings the analyzer is
congured to receive a valid network address
by a DHCP server.
Next enter INFO, to check if the instrument
has been assigned a valid network IP address:
If no network IP address has been assigned,
check the network settings ( X-STREAM
instruction manual, page 6-79 )
Ethernet1 connector
Ethernet2 connector
Field housings Table top analyzers
3.10.1 Connection Via Network
Connect your computer to the network, open
a web browser and enter the instrument´s IP
address. If everything is congured properly,
the analyzer's logon screen shows up (
3-30).
3.10 Web Browser

Emerson Rosemount Xstream Series Specifications

General

Brand	Emerson
Model	Rosemount Xstream Series
Category	Measuring Instruments
Language	English