Emerson Process Management GmbH & Co. OHG 3-27
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
3
Startup
3.9 Checking the Settings
Congratulations!
You´ve now successfully completed check-
ing the unit’s setup!
• Press home to return to the MEASURE-
MENT DISPLAY.
For now, make a local backup:
Enter LOCAL BACKUP and then select
"Save..".
Conrm the operation (select "Yes!").
Wait until "Progress" shows 100 %, then press
enter to return to LOCAL BACKUP.
Copying Data
Busy 0
Progress 100 %
Press
to return
Local Backup
Save..
UsrBack Date 7/29/09 14:26
Restore..
Undo Restore!
Busy 0
Progress 0 %
Save new local backup
and overwrite old one!
Are you sure?
No!
Yes!
We recommend to perform at least a zero
calibration, after startup of the instrument, to
ensure proper measuring results.
4-15 for information on how to perform a
manual calibration. If your instrument features
a valve block, X-STREAM XE instruction
manual for a comprehensive description of
calibration procedures.
To Next Page
Loading...
Need help?
General
