Emerson Process Management GmbH & Co. OHG S-9
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
S
Safety Instructions
Safety Instructions
EXPLOSION HAZARD BY DAMAGED FLAME PATHS
Take care to not damage the housing nor threads, and to not produce
scratches on the ange, as threads and ange function as ame paths!
Violation may result in explosion and personal injury!
ELECTRICAL SHOCK HAZARD WHEN CONNECTING TO MAINS
Before connecting the analyzer to mains power, please read the chapter on
safety warnings and the following instructions carefully.
ELECTRICAL SHOCK HAZARD WHEN OPERATED OPENED
Do not operate without covers secure. Do not open while energized.
Installation requires access to live parts which can cause death or serious
injury.
For safety and proper performace this instrument must be connected to a
properly grounded three-wire source of power.
Violation may cause explosion and personnel injury!
EXPLOSION HAZARD WHEN OPEN
Do NOT operate the instrument with doors or covers open! This is permitted
only when no hazardous atmosphere is present! Depending on the local
regulation, this may require a competent hot work supervisor to issue a
hot work permit.
Use ALL 20 screws to x the cover!
Violation may cause an explosion hazard!
To Next Page
Loading...
Need help?
General
