Emerson Process Management GmbH & Co. OHG4-2
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
4 Service and Maintenance
EXPLOSION HAZARD BY FLAMMMABLE GASES
Leaks may cause explosion when measuring ammable gases!
When measuring ammable gases it is recommended to perform a leak test
on all gas paths, connections and components before startup or applying
power. Leak tests should be carried out on a 2 month‘s regular basis and
after repair/maintenance.
See the analyzer instruction manual for instructions on how to carry out
leak tests.
HAZARDS BY HAZARDOUS GASES
When measuring ammableand/or toxic gases it is recommended to purge
the system with air or an inert gas, e.g. nitrogen, prior to opening the gas
paths.
Violation may cause an explosion and/or personal injury or death!
EXPLOSION HAZARD BY UNAUTHORIZED MODIFICATION
Modications affecting the integrity of type of protection (e.g. afxing
addtional threads, replacing the ame arrestors by other model) are NOT
PERMITTED!
Violation may cause an explosion and/or personal injury or death!
To Next Page
Loading...
Need help?
General
